Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5
About the Versura V2
The VERSURA V2 brings together specialist cabinet construction and carefully selected drivers in a floorstanding loudspeaker designed for natural, engaging reproduction.
A dedicated midrange driver works alongside a 34 mm tweeter (beryllium or diamond) and two 18 cm bass-midrange drivers. The sealed enclosure provides bass extension to a lower limit of 30 Hz, while the narrow cabinet gives the speaker a discreet presence in the room.
The crossover, built on Mundorf components is developed through careful measurement and listening, with components selected for close tolerances and long-term stability.
The Construction
At the heart of the VERSURA V2 is its Panzerholz cabinet. Also known as Tankwood, this material combines layers of natural wood with phenolic resin, compressed under high pressure. Its density, rigidity and internal damping help control cabinet vibration.
The enclosure rests on a base machined from solid aluminium. AUER’s stainless steel feet use ceramic ball contacts and a three-point support arrangement, with additional stabilising feet to help prevent tipping.
Matte and high-gloss colours, walnut and oak finishes allow the VERSURA V2 to complement a wide range of interiors. Special paint finishes are available on request.
Technical Specifications
Design
Three-way, sealed-box floorstanding loudspeaker
Drivers
Tweeter: 34 mm beryllium or diamond
Midrange: 12 cm
Bass-midrange: 2 × 18 cm
Frequency Response
30 Hz–40 kHz (±3 dB)
Sensitivity
89 dB at 2.83 V / 1 m
Impedance
Nominal: 8 Ω
Minimum: 6 Ω
Recommended Minimum Amplifier Power
20 W
Connections
Optional bi-wiring
Cabinet Material
Panzerholz
Dimensions, H × W × D
1191 × 220 × 350 mm
Weight
78.4 kg per speaker
